Grease trap for washing SG 0,5-0,04 “Optima” F
Grease trap under the sink (fat separator) SZ 0.5-0.04 Optima F – with filter bags
Grease traps of the Optima series are used in small cafes, restaurants, kitchens and carving shops of supermarkets. Also, these grease traps can be installed in apartments, country houses and cottages.
- Length – 450mm
- Width – 340mm
- Height – 320mm
- Diameters of branch pipes – 50mm
- Productivity – 0.5 m3 / hour (0.145 l / s)
- Permissible peak discharge – 25l
1. Grease trap (grease separator) – body and cover.
2. Filter bags – 5pcs (one is preinstalled and 4 pieces per pack).
3. Passport to the fat separator.
4. Conclusion of the sanitary-hygienic service
– allows you to pull out all the garbage from the grease trap at a time;
– there is no need to drain the grease trap to clean the settled heavy sediments from the bottom;
– do not need a special container for draining fat;
– there is no need to often wash the grease trap from the fat deposited on the walls;
– reduces water consumption for maintenance of the fat separator;
– allows you to increase the interval between washing the grease catcher;
– increases filtration, further reduces the concentration of fat in wastewater;
– significantly reduces the service time of the fat separator.