Three-layer monolithic polyethylene pipes PE 100 RC for water supply

Three-layer polyethylene pipes for water supply are made with co-extruded layers of PE 100 RC, both on the outer surface and inside the pipe.
Three-layer PE pipes PE 100 RC for water supply are manufactured Ø63 ÷ 630 mm with standard dimensional ratios SDR 11; SDR 13.6; SDR 17; SDR 21; SDR 26 (complies with the requirements of EN 12201-2).

Three-layer monolithic polyethylene pipes PE 100 RC are very reliable and designed for laying and renovation of networks by all methods - both traditional and trenchless.
Three-layer PE pipes PE 100 RC are connected by welding (butt-welded with a heated tool, using thermistor couplings and socket parts), as well as mechanically.
Due to the high melt viscosity during extrusion of PE 100 RC, its long-term hydrostatic strength, exceptional resistance to long-term loads and high resistance to crack propagation, three-layer polyethylene pipes made with PE 100 RC can be more widely used in the installation of water pipes (for example: it is possible to lay pipes without sand cushion and sanding, as well as the possibility of reusing excavated soil when installing in open trenches, as well as with trenchless laying methods).

Methods for laying and using three-layer polyethylene pipes:

laying in a trench with backfilling with local soil (without a sandy base and backfilling with sand);
Relining (pulling a pipe in an emergency network with a decrease in diameter);
laying in a narrow trench;
HDD (horizontal directional drilling);
Kreking (reconstruction by the method of destruction of the emergency pipeline with the preservation or increase in the diameter of the working pipe).

The depth of scratches (cuts) of the outer layer of the pipe is allowed up to 75% of its thickness.

Three-layer PE pipes PE 100 RC are connected, like ordinary PE 100 pipes, using polydiffusion welding (butt welding with a heated tool, using thermistor sleeves and socket parts), as well as mechanically using Unidelta compression parts.